Gens Ace iMARS Dual Channel Charger (200W/220V)

The iMARS Dual Channel and is the ideal charger for users who need to charge 2 batteries at the same time without the need for two separate chargers.

Note: This video was made by the manufacturer of the product and therefore we are not responsible for its contents.

• 4 setup buttons
• Charging automatically terminates through Delta Peak detection
• Variable charge rate between 0.1A to 15A
• Compatible with NiMH, NiCd, Li-Po, Li-Fe and Li-Po HV batteries
• Charge and storage 1 to 6 lithium cells (Li-Po / Li-Fe / Li-Po HV)
• Charges 1 to 16 NiCd / NiMH cells
• Discharge functions
• Microprocessor controlled during charging
• Various Charging Options for Lithium Batteries
• Charging time is displayed during the process.
• 2.4 inch IPS LCD Display
• Synchronous output, 2-in-1 Fast-charging

Technical Specifications:

AC Input Voltage: 110V-220V

Battery Charge Type: LiPo,LiPo HV,NiMH

Cell Count: LiPo: 1-6S; NiMh / NiCd: 1-16 Cells

Display: LCD; IPS

Dimensions: 145x76x62mm

Charge Current: 0.1A-15A (per channel)

Charge Power: 200W max.

USB Output: 5V/2.4A

Weight: 530g

• (1) Charger
• (1) AC Input cable
• (2) Deans charging cable
• (2) EC3 charging cable
• (2) EC5 charging cable

• DO NOT leave the battery in your model when charging
• DO NOT leave unattended when charging
• ALWAYS balance charge the battery
• ALWAYS use a LiPo charging bag
• YOU MUST use a LiPo specific charger to charge the pack (Ni-Mh or Ni-Cd only chargers WILL NOT WORK!)
• YOU MUST not over discharge the LiPo battery pack
• ALWAYS put the battery in storage mode if not in use
• ALWAYS let the battery cool off before charging or using it
• READ the instructions carefully before operating this battery