Kyosho Inferno MP9 TKI4 V2 GP 4WD Racing 1:8 Buggy Readyset ( KT-331P / Reds Edition)

Take the incredible performance of the MP9 TKI4 straight from the box to the race circuit with this Readyset!

With 8 world championship titles, the Inferno has set the standard as the most powerful 1/8 scale engine racing buggy of all time. The DNA of the competition-level MP9 TKI4 kit model and its advanced racing technology is embodied in this Readyset. The MP9 TKI4’s long front suspension arms and 17.5°caster front hub carriers create superior cornering and sharp control. The cab forward type body increases downforce, giving the TKI4 an aerodynamic performance advantage and delivers balanced cornering and optimal traction.

Front suspension arm is 2mm longer than the TKI3 and ribs have been added for more strength. Delivers both improved surface tracing and cornering.

Front Shock Stay of MP9 TKI4 V2 reinforced to 5mm thickness from 3mm one of previous type to dramatically improve durability and rigidity, further improves stability and traction when jump landing.

Installed stabilizers on front and rear control chassis roll when cornering and contribute to improved steering response.

The newly designed “K-Blox” tires improve grip on various on-road and off-road surfaces with changing higher pins.

Adjust settings easily with jog dials while viewing the LCD screen on the included 2.4GHz Syncro KT-331P transmitter.

• The body is supplied painted and detailed.
• The radio box is closer to the throttle servo and it is more centered in the model.
• Threaded Big Bore shocks with blue springs.
• Support for KO switch.
• The rims have 82mm of diameter and are dish type.
• 5mm front shock tower.
• Low CG engine mounts.
• Battery box in the front part of the car fixed to the radio plate for improved handling.
• Low profile radio box.
• Receiver box fixed to the chassis.
• Heavy duty servo horns ( for Futaba, Sanwa, KO/JR, Hitec ).
• Equipped with a 3mm chassis.
• Front steering aluminum knuckles.
• Includes Picco P3TT engine, welded manifold and tuned muffler.
• Equipped with a 125cc fuel tank with splash guard.
• Equipped with a 3 piece heavy duty clutch shoes.
• Includes all turnbuckles for easy adjustment.
• Equipped with plastic chassis braces.
• HD front universal lightweight swing shafts.
• Equipped with waterproof high torque servos.
• Equipped with a 13 teeth steel clutch bell that rolls on 2 bearings.
• Equipped with a new 3 piece flywheel with 32mm of diameter.
• Equipped with a 46 teeth spur gear.
• Great agility due to a optimized center of gravity and a bigger mass concentration.
• Front hubs with added protection for greater durability.
• The center differential has a higher capacity of silicone oil.
• Front and rear stabilizer bars.
• 100% captured hinge pins.
• Complete ball bearing transmission.

Length: 490mm

Width: 307mm

Height: 180mm

Wheelbase: 325 ~ 330mm

Tread (F/R): 254mm

Tire(F/R): 116x44mm

Gear Ratio: 11.7:1

Weight: 3,370g (approx.)

Motor: Picco P3TT Ceramic

• Pre-assembled chassis
• Pre-cut and painted body
• 2.4GHz R/C system installed (3ch receiver)
• L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
• Cross wrench (large)
• 17mm wheel wrench

• 8x AA size Batteries
• Starter Box
• Fuel
• Fuel Bottle
• Glow Igniter